THOR Platinum Parts

The Standard Pier Kit is designed using 4 high grade galvanized j-bolts to mount the main pole to the concrete. The pier kit is usually used when moving the system and installing a new base for the system. This does not include the rebar needed for the installation, but you can pick this up at your local hardware store.

Version Notes: The Standard Pier Kit will work on the Pro Dunk Bronze, Pro Dunk Silver, Pro Dunk Gold, Pro Dunk Platinum, Hercules Gold and Hercules Platinum.

This includes:

• [1] Standard Pier Kit Template Plate
• [4] J-bolt 40cm x 10cm x 16mm
• [8] 16mm hex nut
• [4] 16mm hex nut with built in lock washer
• [8] 16mm flat washer

This backboard is designed for the Pro Dunk Platinum basketball system and measures 72 Inch wide by 42 Inch height with 1/2 Inch regulation tempered glass. This backboard is a regulation sized backboard and plays just like the gym. Please note this does not come with any hardware and it does not include the H-bracket mounted to the back of the backboard.

This includes:

• [1] 72x42x1/2 Inch glass with white shooters square and boarder
• [1] Full aluminum frame with L brackets pre-installed

This part replaces the white plastic or black cord that attaches the net to the rim. Note that this is cord is NOT coupled but does included a metal crimp several inches from the end that functions as a stop. Watch a video on how to replace the net tie.

Version Notes: Older rims that have curly "rim horns" do not need this part. Secondly, this replacement part may not look exactly like your original.

Heavy-duty nylon white net designed for outdoor use. This does not include the net tie. If your rim uses a net tie to hold the net on we recommend checking it to make sure you do not also need a replacement net tie. Video: Watch a video on how to replace the net

This includes:

• [1] White Nylon Net

8x6 Inch gusset padding is used on the Pro Dunk Platinum main pole and covers the base of the main pole for safety. This does not include the pole padding that covers the majority of the main pole.

Version Notes: The 8x6 Black Gusset Padding is designed for the Pro Dunk Platinum that has an 8x6 main pole. Older Pro Dunk Platinum systems might use 6x6 Gusset Padding. This can be found under the Pro Dunk Gold parts list. Navigate to www.produnkhoops.com/parts and select Pro Dunk Gold.

This includes:

• [1] 8x6 Inch Fitted Black Gusset Pad

8x6 Inch pole padding is used on the Pro Dunk Platinum main pole and covers the bottom 2/3 of the main pole for safety.

Version Notes: The 8x6 Black Pole Padding is designed for the Pro Dunk Platinum that has a 8x6 main pole. Older Pro Dunk Platinum systems might use 6x6 Pole Padding. This can be found under the Pro Dunk Gold parts list. Navigate to www.produnkhoops.com/parts and select Pro Dunk Gold.

This includes:

• [1] 8x6 Inch Fitted Black Pole Pad

72 Inch backboard padding can be mounted on any of our 72 Inch by 42 Inch backboards. This padding is a foam coated with a latex coating to resist the elements. It covers the edge of the bottom third of the backboard.

This includes:

• [1] 72 Inch Left Side Backboard Padding
• [1] 72 Inch Right Side Backboard Padding
• [1] Stainless Steel Hardware kit package for mounting the backboard padding

This part includes the gear box, cylinder and holster all together as well as a handle for manual hand cranking and bit for drill powered adjustment.

It replaces Lightning Adjust actuators and legacy hand-crank-only actuators (Large Actuator D/L)

The large Lightning Adjust actuator can be used on the THOR Diamond or THOR Platinum basketball system allowing for drill powered height adjustment.

Any name brand 18 to 24 volt battery powered drill can be used with Lightning Adjust. If you don't have a drill one is available here in the parts section.

• Full details
• Installation video
• Installation instructions

This includes:

• [1] Lightning Adjust [Large]
• [1] Lightning Adjust Socket
• [1] Preassembled Drill Holster
• [1] Manual Hand Crank
• DOES NOT INCLUDE DRILL

Name brand drill perfect for powering Lightning Adjust. This 18v to 24v drill includes a battery and charger.

This includes:

• [1] Name brand drill * brand may differ from photo
• [1] Battery
• [1] Battery charger

Two of the Pro Dunk Platinum spring assists are installed behind the main pole and in front of the actuator. These make the system much easier to raise and lower. 2 spring assists are needed to complete a Pro Dunk Platinum.

This includes:

• [1] Pro Dunk Platinum Spring Assist

The height meter and sticker are used to measure the height of the system at any given time.

This includes:

• [1] Pro Dunk Platinum Height Sticker
• [1] Steel Height Meter

The Pro Dunk Platinum height sticker is applied to the spring assist and is used to tell the height of the system when using the steel height meter with it.

This includes:

• [1] Pro Dunk Platinum Height Sticker Only

Hoops Breakaway rim features a dual spring system designed to break downwards when a player dunks on it. Video: Replace Your Net

This includes:

• [1] Hoops Breakaway Rim Plate Cover
• [3] Self-Tapping screws for the rim plate cover
• [1] Hoops Breakaway Rim
• [1] Net
• [4] Rim bolt with washer, lock washer, and hex nut
• Does NOT include rim spacers

Includes 4 stainless steel rim bolts, washers, and hex nuts to install the rim to the backboard. Please note, that this does not include the 4 rim spacers that go between the rim and backboard. They are sold separately.

This includes:

• [4] 7cm x 10mm hex bolt with a 17mm socket head
• [4] 10mm hex nut with 17mm socket head
• [8] 10mm flat washer
• [4] 10mm lock washer

Includes four rim spacers and are used to mount the rim off the backboard so that it does not touch the glass. These are required to be installed before the rim. The rim spacer is a steel insert that is coated in soft plastic.

This includes:

• [4] Rim Spacer

Stainless steel self-tapping screw designed to mount the rim plate cover to the underside of the rim. This plate covers the springs and internal workings of the rim. Two are needed to mount the rim plate cover to the rim. Each measures 3cm long and 6mm in diameter with a 10 mm socket head.

This includes:

• [1] 3cm x 6mm self-tapping screw with a 10 mm socket head

Contains the 8 main bolts (stainless steel) used to assemble the main structure of the Pro Dunk Platinum basketball system.

Version Notes: The Pro Dunk Platinum bolt kit is designed for the 8x6 inch main pole system. If you have the older 6x6 inch main pole Pro Dunk Platinum then you will need to submit a support request for the parts you are in need of. This can be done at www.produnkhoops.com/support.

Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnkhoops.com/support.

This includes:

• [1] 14cmx16mm bolt and lock nut
• [1] 19cmx16mm bolt and lock nut
• [2] 30cmx18mm bolt and lock nut
• [3] 33cmx18mm bolt and lock nut
• [1] 33cmx20mm bolt and lock nut

The Pro Dunk Platinum H-bracket (with rust armor) is designed to connect the backboard to the main extension arm and the two upper linkage arms. This is a black structure that mounts to the top and bottom of the backboard aluminum frame using 8 bolts and nuts.

This includes:

• [1] Pro Dunk Platinum H-Bracket (without hardware)

The includes 8 stainless steel bolts, nuts and washers and are used to mount the H-bracket to the aluminum frame on the backboard. 4 are used on the top and 4 are used on the bottom securing it in the center of the backboard.

Version Notes: Please measure and verify you have the same size bolts before ordering. All measurements can be found below. If you have different size bolts please submit a support request at www.produnk.com/support.

This includes:

• [8] 3 1/2cm x 8mm hex bolt with a 13mm socket head
• [8] 8mm small washer
• [8] 8mm large washer
• [8] 8mm lock washer
• [8] 8mm hex nut with a 13mm socket head

The Pro Dunk Platinum main pole is a 8x6 Inch steel pole with 7 gauge thick steel walls.

Version Notes: Please measure and verify you have the same size pole before ordering. If you have an 6x6 inch main pole please submit a support request at www.produnkhoops.com/support with the requested part.

This includes:

• [1] 8x6 Inch Pro Dunk Platinum Main Pole with Rust Armor

Pro Dunk Platinum Main extension arm connects the main pole to the H-bracket mounted on the back of the backboard.

Version Notes: Please verify that you have a 8x6 inch main pole before ordering. If you have the older 6x6 main pole please submit a support request at www.produnkhoops.com/support with the requested part.

This includes:

• [1] Pro Dunk Platinum Main Extension Arm With Rust Armor

Two of the Pro Dunk Platinum upper linkage arms are used to connect the main pole to the H-bracket on the back of the backboard. These are located just above the main extension arm. Two of these are needed for each system.

Version Notes: Please verify that you have a 8x6 inch main pole before ordering. If you have the older 6x6 main pole please submit a support request at www.produnkhoops.com/support with the requested part.

This includes:

• [1] Pro Dunk Platinum Upper Linkage Arm

This safety pin is designed for a 8x6 main pole used on the Pro Dunk Platinum. The safety pin will restrict the height of the basketball system for safety reasons.

Version Notes: Please verify that you have an 8x6 inch main pole before ordering. If you have the older 6x6 main pole please submit a support request at www.produnkhoops.com/support with the requested part.

This includes:

• [1] Safety Pin Bar
• [1] Safety Pin Locking Pin